Speaker Setup Tab - Extron electronics SSP 7.1 User Manual

Speaker Setup Tab

After completing the
system configuration that is not available from the front panel. The Speaker Setup tab provides
access to four second-level tabs:
Tab (see page 29),
Tab (see page 36).
Speaker Configuration Tab
Figure 29.
Speaker size
Speaker size determines whether or not bass management applies to that speaker. For more
information see
Speaker size settings — All the buttons in a single column offer mutually exclusive
•
choices. Only one selection can be made from each column. For example, front speaker size
must be set to either
Figure 30.
Left and right
•
•
•
•
tab, the next tab is
Main
Speaker Configuration Tab
Testing & Output Trim Tab
Speaker Configuration Tab
Bass Management on page 14 and
Large or Small
Speaker Size Settings
speakers and left and right
Front
— Bass management is off.
Large
— Bass management is on.
Small
(Surround speakers only) — No signal is sent to the output for that channel,
None
effectively removing the speaker from the current configuration.
, which is the first tab to allow
Speaker Setup
(see below),
(see page 32), and Speaker Equalization
Speaker Size Settings
. It cannot be set to both values or neither value.
speakers are set in pairs.
Surround
SSP 7.1 • Setup and Control Software
Speaker Delay
on page 14.
27