Extron electronics SSP 7.1 User Manual page 51

Dolby, DTS and Mono Settings Tab
After configuring
Override Preferences
Figure 58.
Dolby, DTS and Mono Settings Tab
This tab allows advanced adjustments to the settings for Dolby ProLogic II/IIx Music, DTS Neo:6,
and how mono signals are received and output by the SSP 7.1.
Dolby Pro Logic II/IIx Music Settings
The Dolby Pro Logic II/IIx Music listening mode is used
for listening to any stereo music recordings. For more
Dolby Pro Logic II/IIx Movie
information about the
or Music, see page 59. These controls adjust
global settings for the listening mode, to tailor the
sound to individual listening tastes.
Dimension control
These buttons allow the user to choose
Neutral , or Rear (the default is
information, see Dimension control
Panorama control
These buttons allow the user to switch the Panorama
settings or (the default is
On Off
information, see Panorama control
Center Width control
This sliding bar adjusts the Center Width control in
the range - . When the control is set to
0 7
comes from the front center speaker. At
comes from the front right and left speakers. The
default setting is (bold and underlined, as shown in
3
figure 59). For more information, see
control
on page 59.
, click the
Dolby, DTS, and Mono Settings
,
Front
Neutral ). For more
on page 59.
). For more
Off
on page 59.
, the sound
0
, the sound
7
Center Width
SSP 7.1 • Setup and Control Software
tab.
Figure 59. Dolby Pro Logic II/IIx
Music Settings
43