Extron electronics SSP 7.1 User Manual page 88

Command
Mono Source Setting (for Analog input #5 only)
Set mono source to left
channel
Set mono source to right
channel
Set mono source to left +
right channel
View current mono source
Analog Input Gain Adjustment (for Analog Input #5 only)
Set analog input gain level
View current analog input
gain level
Enable/Disable Parametric EQ Filter Bypass for each Output Channel
Enable bypass
Disable bypass
View current bypass status
Parametric EQ Filter Frequency Setting for each Output Channel
Set frequency for each filter
and output channel
View frequency for each
filter and output channel
Parametric EQ Filter Gain Setting for each Output Channel
Set gain for each filter and
output channel
View gain for each filter
and output channel
Parametric EQ Filter Q Setting for each Output Channel
Set Q value for each filter
and output channel
View Q value for each filter
and output channel
NOTES:
X@
— Audio outputs (1-8):
1
= Right back; = Subwoofer.
7 8
X4$
— Parametric EQ filter selection (
X4%
— Parametric EQ filter frequency. Default values:
1000 Hz (filter 5), 2000 Hz (filter 6),
X4^
— Parametric EQ Q value, multiplied by 1000 (from
ASCII Command
(host to unit)
E }
N1SSP
E }
N2SSP
E }
N3SSP
E }
NSSP
E X( }
A SSP
E }
ASSP
E X@ X4$ }
E * *0SSE
E X@ X4$ }
E * *1SSE
E X@ X4$ }
E * *SSE
E X@ X4$ X4% }
F * * SSE
E X@ X4$ }
F * SSE
E X@ X4$ X4^ }
G * * SSE
E X@ X4$ }
G * SSE
E X@ X4$ X4& }
Q * * SSE
E X@ X4$ }
Q * SSE
= Left front; = Center; = Right front;
2 3
to ): is the lowest frequency range;
1 9 1
Hz (filter 1),
62
4000 Hz (filter 7), 8000
707
Response Additional Description
(unit to host)
X1)] Sets mono source:
SspN
X1)
1
X1)]
SspN
2
3
X1)]
SspN
X1)] Shows the current mono source setting.
SspN
X(] Sets the analog input gain level:
SspA
X(
0
X(] Displays the current analog input gain
SspA
X@ X4$ X#] X#
SseE * *
0
X@ X4$ X#]
SseE * *
1
X@ X4$ X#]
SseE * *
Sets the frequency for each filter and
output channel.
X@ X4$ X4%]
SseF * *
X@ X4$ X4%] Shows the current frequency for each
SseF * *
frequency and output channel.
Sets the gain for each filter and output
channel.
X@ X4$ X4^]
SseG * *
X@ X4$ X4^] Shows the current gain for each filter and
SseG * *
output channel.
Sets the Q value for each filter and output
channel.
X@ X4$ X4&]
SseQ * *
X@ X4$ X4&] Shows the current Q value for each filter
SseQ * *
and output channel.
= Left surround;
4
is the highest frequency.
9
Hz (filter 2),
125 250
Hz (filter 8), 16000 Hz (filter 9)
to ; default )
15000 2000
— Mono source
= Left
= Right
= Left + right (default)
— Input gain
to dB in 1 dB steps (default =
+24
— Status
= Off (default)
= On
= Right surround; = Left back;
5 6
Hz (filter 3), Hz (filter 4),
500
SSP 7.1 • SIS Commands
)
0
80