Extron electronics SSP 7.1 User Manual page 59

9. Open the SSP 7.1 Setup and Control software and click
menu. The Firmware Loader
Figure 76. Add Device... Dialog Box
10. Select SSP 7.1 from the device list, RS-232 as the connection method, select the correct
and
Com Port Baud Rate
connects to the SSP 7.1.
When the connection is made, the name of the device appears, with a green check mark, in
the
Connected Device
11. Click the button and navigate to the folder where the firmware file was saved (see
Browse
step 8).
12. Click the button. The
Add
window.
Figure 77. Firmware Loader Main Window
13. Click .
Begin
14. When the transfer is complete, the
column shows Complete
dialog box opens.
Add Device...
(default rate is 38400) and click the
panel.
box closes to reveal the main
Add Device...
Total Progress
.
SSP 7.1 • Setup and Control Software
Update Firmware in the
button. The PC
Connect
Firmware Loader
panel shows and the
100% Status
Device
51