Setup - Extron electronics SSP 7.1 User Manual

Setup

This section provides background information about arranging speakers in a room and about
some of the settings that can be adjusted by the SSP 7.1 Setup and Control Software. Extron
strongly recommends that the control software is used to make any configuration changes to the
SSP 7.1 (see
•
•
•
•
•
•
•
•
•
•
Speaker Placement
The following figures show the recommended speaker placement, relative to the listener, for a
five, six, or seven speaker system and for subwoofer placement.
NOTE:
LS
Figure 11.
See a list of
Setup and Control Software
Speaker Placement
Bass Management
Speaker Delay Settings
Test Signals
Output Channel Trim Settings
Listening Mode Settings
Dynamic Range Compression Control
Tone Controls
Volume Output
Equalization
All speakers should be angled inwards so that they face towards the listener.
L C R
0°
22°
30°
Five Speaker Setup
Speaker Abbreviations
on page 20). Topics in this section include:
RS
90°
110°
on the next page.
SSP 7.1 • Setup 12