Extron electronics SSP 7.1 User Manual page 68

DTS 96/24 + Dolby Pro Logic IIx Movie or Music
This mode is similar to DTS + Dolby Pro Logic IIx Movie or Music (see above), but is intended for
use with DTS 96/24 source formats.
DTS + Dolby EX
This mode uses Dolby Digital EX matrix mixing surround effects to create an additional surround
center back channel from the discrete 5.1 information of a DTS Digital Surround source format to
create up to 6.1 channel effects.
NOTE: This listening mode is available only when the SSP 7.1 is set up for 6.1 to 7.1
channel outputs and a DTS Digital Surround source format is present.
DTS 96/24 + Dolby EX
This mode is similar to DTS + Dolby EX (see above), but is intended for use with DTS 96/24
source formats.
DTS Neo:6 Cinema or Music
This mode produces up to seven separate full bandwidth matrix channels from a 2-channel
(stereo) audio input.
DTS Neo:6 Cinema assigns the in-phase component of the signal to the center channels and the
reversed-phase component to the left and right surround and center back or left and right back
channels.
With DTS Neo:6, the left and right front channels bypass the decoder and are played directly
with no loss of sound quality. The signal outputs from the center, right surround, left surround (for
5.1), the center back (for 6.1), or left and right back (for 7.1) channels. In the DTS Neo:6 Music or
Cinema mode, there is one adjustable control:
Center Image control
The Center Image control varies the amount of attenuation applied to the left and right channel
information of the input source that is used for creating the output center channel effects. When
it is set to 0 , the mixed input signal information, intended for use in creating the center output
channel of the DTS Neo:6 listening modes, is filtered back to the front left and right output
channels. This creates the effect of spreading the centralized audio signal across all three front
output channels. When this control is set to , the matrixed information intended for the front
10
left and front right output channel effects is fully attenuated, allowing the center channel to create
a more centralized effect from the front channels.
SSP 7.1 • Reference Material 60