Extron electronics SSP 7.1 User Manual page 83

Command
Speaker Configuration Information Request
View channel outputs
activity
View mute channel
NOTES:
X4)
is an eight digit representation with each position in the sequence representing a speaker, listed in the same order as in
0 = no audio signal present on channel
1 = channel receiving audio signal
2 = channel receiving audio signal, but muted
For example, ActCh 11122001 means the first (left front), second (center), third (right front), and eighth (subwoofer) channels are receiving
an audio signal; the fourth (left surround) and fifth (right surround) are receiving a signal but it is muted; the sixth (left back) and seventh (right
back) are not receiving a signal.
X3(
is an eight digit representation with each position in the sequence representing a speaker, listed in the same order as in
0 = unmuted
1 = muted
For example, Mut 00100001 means the right front speaker and subwoofer are muted and all other speakers are unmuted.
Set Speaker Size Settings
Set speaker size
View specific speaker size
Surround Back Speaker Settings
Set surround back
speakers to none
Set surround back speaker
to one small speaker
Set surround back
speakers to two small
speakers
Set surround back speaker
to one large speaker
Set surround back
speakers to two large
speakers
View surround back
speakers
Subwoofer Output
Set subwoofer off
Set subwoofer on
View subwoofer control
ASCII Command Response
(host to unit) (unit to host)
32I
ActCh
35I
Mut
E X3! X1^ }
S * SSP SspS
E X3! }
S SSP SspS
E }
H0SSP SspH
E }
H1SSP SspH
E }
H2SSP SspH
E }
H3SSP SspH
E }
H4SSP SspH
E }
HSSP SspH
E }
J0SSP SspJ
E }
J1SSP SspJ
E }
JSSP SspJ
Additional Description
X4)] Shows activity of each channel.
X3(] Shows mute status of each channel.
Sets number of speakers in each group.
X3! X1^]
*
X3!
— Speaker groups
X3! X1^]
*
= Left and right front
1
= center
2
= Left and right surround sound
3
X1^
— Speaker group size
= None (invalid for front speakers)
0
= Small
1
= Large
2
X3@] X3@
— Surround back speaker size
= None (default)
0
= 1 small speaker
1
X3@]
= 2 small speakers
2
= 1 large speaker
3
X3@]
= 2 large speakers
4
X3@]
X3@]
X3@]
X#] Sets subwoofer to off.
X#
— Status
= Off
0
= On (default)
1
X#] Sets subwoofer to on.
X#] Shows subwoofer status.
X@
.
X@
.
SSP 7.1 • SIS Commands 75