Extron electronics SSP 7.1 User Manual page 55

s
Options
There are two items in the Options menu.
— The Show
Show Trace Window
•
Trace Window command opens the
Trace Window (see figure 69). This
window displays all commands and
data sent from the computer to the
SSP 7.1 unit in the upper pane, and
all responses and data sent from the
SSP 7.1 unit to the computer in the
lower pane. These data are useful to
qualified service personnel for some
troubleshooting situations.
The Clear Data button clears data
from both panes.
The Close button , shuts down
the window. Data are still being
sent between the computer and the
sound processor and can still be
viewed by reopening the window.
—
Re‑enable Dialogs
•
Certain warning dialog boxes,
such as the
Connect to
box (figure 68), have
device?
a check-box that stop them
from being shown again. If you
discover that it is helpful to
receive the warning, selecting
restores
Re‑enable Dialogs
all the dialog boxes that had
been blocked.
Figure 68. Options Menu
Figure 69. Trace Window
Connect to device?
Emulate / Work of ine
Device Name:
SSP 7.1
Connection Method:
RS-232
Com Port:
COM1
Baud Rate
38400
Stop prompting me to connect upon startup
Figure 70. Connect to device? Dialog Box
SSP 7.1 • Setup and Control Software
?
Connect Cancel
47