Extron electronics SSP 7.1 User Manual page 76

Symbols Used in this Guide
The SSP 7.1 can be controlled via a Telnet (port 23) connection using ASCII commands. The
ASCII to hexadecimal (HEX) conversion table shown here is for use with the
Response Table for SIS Commands
Space
Table 11.
The command and response table lists valid ASCII command codes, the responses of the unit
to the host, and a description of the function of the command or the results of executing the
command.
]
}
• —
E
The
Response Table for SIS Commands.
X!
1
3
5
X@
1
2
3
4
5
6
7
8
X#
0
1
X$
0
1
ASCII to HEX Conversion Table
ASCII to HEX Conversion Table
— carriage return with line feed
— carriage return (no line feed)
space character
— Escape key
X/
values defined in this section are the variables used in the fields of the Command and
— Audio inputs (1-5)
and 2 = Digital audio, optical input
and = Digital audio, coaxial input
4
= Analog input
— Audio outputs (1-8)
= Left front
= Center
= Right front
= Left surround
= Right surround
= Left back
= Right back
= Subwoofer
— Status
= Off
= On
— Volume Output Mode
= Fixed (volume no attenuation)
= Variable (default)
(see page 74).
.
SSP 7.1 • SIS Commands
Command and
68