Dtmf Memory - Icom IC-V82 Instruction Manual

■ Transmitting a DTMF code
D Using a DTMF memory channel
qPush [A•
], then push [0•
FUNC
.
MODE
• Rotate [VOL] to select "dtm.OF," if necessary.
0
A
Push
FUNC
OPT
wPush [0•
] for 1 sec. to enter the DTMF memory.
OPT
0
Push for 1 sec.
OPT
e Rotate [VOL] to select the desired channel.
r Push [MONI] or [PTT] to exit the DTMF memory mode.
tWhile pushing [PTT], push [MONI] to transmit the selected

DTMF memory.

• After the DTMF code is transmitted, the transceiver returns to re-
ceive automatically.
D Manual DTMF code transmission
While pushing [PTT], push digit keys, [A•
] and [✱•
[C• ], [D• ], [#•
MR CLR BANK
code manually.
• [✱• ] transmits as "E", [#•
ENT
] to enter
OPT OPTION SET
], [B•
FUNC CALL
] to transmit a DTMF
ENT
] transmits as "F."
BANK
■ DTMF transmission speed
When slow DTMF transmission speeds are required with
DTMF memory transmission (as for some repeaters), the
transceiver's rate of DTMF transmission can be adjusted.
qWhile pushing [Y Y ] and [Z Z ], turn the
power on to enter
wPush [Y Y ] or [Z Z ] several times until
"dtd" appears.
eRotate [VOL] to select the desired
DTMF transmission speed.
• Four speeds are available: "1" (100
msec. intervals) is the fastest; "5" (500
msec. intervals) is the slowest.
rPush [✱•
] to exit
ENT
],
DTMF MEMORY
INITIAL SET MODE
USING
.
INITIAL SET MODE
.
INITIAL SET MODE
7
[VOL]
7
PWR
ENT
27