Tuning Step Selection - Icom IC-V82 Instruction Manual

4
BASIC OPERATION
D By other methods
Via the [Y Y ]/[Z Z ] keys
➥ Push [Y Y ] or [Z Z ] several times to set the desired frequency.
• Each push increases/decreases the frequency by the selected
tuning step. See right content for tuning step details.
✔ For your information— [VOL] function assignment
The [VOL] control can be used as
a tuning dial for frequency tuning
instead of [Y Y ]/[Z Z ] keys. However,
while [VOL] functions as tuning
dial, [Y Y ]/[Z Z ] keys functions as AF
volume control.
qWhile pushing [Y Y ] and [Z Z ], turn
power ON to enter
.
MODE
w Push [Y Y ] or [Z Z ] several times to
select the dial assignment item, "tOP."
e Rotate [VOL] to select the condition.
[VOL] is assigned as
AF volume control.
r To exit
SET MODE
14
INITIAL SET
[VOL] is assigned as
tuning dial.
, push [✱•
].
ENT
D Tuning step selection
The IC-V82/U82 has 8 tuning
steps— 5, 10, 12.5, 15, 20, 25, 30
and 50 kHz. The tuning step is selec-
table in
SET MODE
qPush [A•
FUNC
enter
SET MODE
wPush [Y Y ] or [Z Z ] several times to
select the tuning step item.
[VOL]
eRotate [VOL] to select the desired tuning step.
r Push [✱•
ENT
PWR
ENT
.
] then [8• ] to
SET
.
] to exit .
SET MODE
[VOL]
A
FUNC
ENT
8
SET