D Gps Automatic Transmission - Icom IC-V82 Instruction Manual

11
DIGITAL MODE OPERATION
D D GPS Automatic transmission
q While connecting a GPS receiver, push [A•
] to enter
[0•
OPT OPTION SET MODE
w Push [Y Y ] or [Z Z ] several times to select the GPS automatic
transmission.
• "GtX" appears.
e Rotate [VOL] to set the interval time for the GPS auto-
matic transmission.
• Interval time is selectable from 0.5 (30 sec.), 1, 3, 5, 10, 30 min.
rPush [Y Y ] three times to select the transmit message se-
lection, if desired.
• GPS TX message is selectable from OFF and C1 to C6.
• TX message must be programmed in advance. (see page 50 for
setting)
tPush [✱•
] (or [D•
ENT
56
FUNC
.
]) to exit
CLR OPTION SET MODE
IMPORTANT:
] and
every setting interval even while receiving an another sta-
tions communication. To prevent interfere the another sta-
tions, set the GPS transmission together with the Repeater
lockout item "RLO" (set to "bU" busy lockout) in
. (p. 62)
MODE
D D Receiving a GPS transmission
q Push [A•
FUNC
w Push [Y Y ] or [Z Z ] several times to select the received posi-
tion.
• "RXP.OS" appears.
e Push [0•
] for 1 sec. to enter the position indication.
OPT
• Latitude data and longitude date appear by every pushing [Y Y ]
or [Z Z ].
rPush [0•
] then push [Y Y ] twice to select the received
OPT
GPS message.
tPush [0•
] for 1 sec. to enter the message.
OPT
• Received message is indicated, push [Z Z ] or [Y Y ] to move the
cursor to left or right, respectively.
yAfter checking a received position and message, push
.
] (or [D•
[✱•
ENT
GPS Automatic transmission transmits at
] and [0• ] to enter
OPTION SET MODE
OPT
]) to return to normal operating mode.
CLR
INITIAL SET
.