Icom IC-V82 Instruction Manual page 54

11
DIGITAL MODE OPERATION
D D Station call sign programming
Station call sign must be programmed for the specified sta-
tion call as well as repeater operation in both Digital voice and
low-speed data communications.
q Push [A•
] and [0•
FUNC
push [Y Y ] or [Z Z ] several times to select the call sign select
mode.
• "yUC" appears for station call sign.
w Push [0•
] for 1 sec then rotate [VOL] to select the de-
OPT
sired call sign channel.
e Push [Y Y ] (or [Z Z ]) to set into call sign programming condi-
tion.
• The 1st digit blinks and channel indication stops blinking.
r Rotate [VOL] to set the desired character or code.
• Push [Z Z ] or [Y Y ] to move the cursor to left or right, respectively.
42
] to enter
OPTION SET MODE
OPT
t Push [Y Y ] (or [Z Z ]) to select 2nd digit, then rotate [VOL] to
set the desired character or code.
• 2nd digit blinks (1st digit stops blinking).
• Repeat this step for programming station call sign.
, then
y Push [0•
] to fix the call sign.
OPT
u Rotate [VOL] to select an another channel from "C1" to
"C6."
i Repeat steps w to u to program another station call sign
channels.
✔ For your information:
Station and/or repeater call sign can be programmed from
Received call record when a call is received.
See page 45 for details.