Icom IC-V82 Instruction Manual page 76

12
OTHER FUNCTIONS
D D Power save
Selects duty cycle for power save function from auto, 1:32,
1:16, 1:8, 1:2 and OFF.
• P–S.At : Duty cycle changes automatically. (default)
• P–S.32 : 1:32 duty cycle
• P–S.16 : 1:16 duty cycle
• P–S. 8 : 1:8 duty cycle
• P–S. 2 : 1:2 duty cycle
• P–S.OF : The power save function is turned OFF.
NOTE: While DV mode operation (with UT-118), or pager/
CSQL operation (with UT-108), the active duty cycle is fixed
1:1 only (even any duty cycle setting other than OFF).
D D Monitor key action
The monitor key, [MONI], can be set as a 'sticky' key. When
set to the sticky condition, each push of [MONI] toggles the
monitor function ON and OFF.
• PU (Push) : Pushing and holding [MONI] to monitor
the frequency. (default)
• HO (Hold) : Push [MONI] to monitor the frequency
and push again to cancel it.
64
D D Tuning speed acceleration
The tuning speed acceleration automatically speeds up the
tuning speed when pushing and holding [Y Y ] or [Z Z ], or rotat-
ing [VOL] rapidly.*
• S–S.At : The tuning speed acceleration is activated. (de-
fault)
• S–S. m : The tuning speed acceleration is not activated.
*When tuning dial is assigned with [VOL].