Memory/Call Operation - Icom IC-V82 Instruction Manual

6

MEMORY/CALL OPERATION

■ General description
The transceiver has 207 memory channels including 6 scan
edge memory channels (3 pairs), and 1 call channel. Each of
these channels can be individually programmed with operat-
ing frequency (pgs. 13, 14), duplex direction (p. 17) and offset
(p. 17), subaudible tone encoder or tone squelch and its tone
frequency (pgs. 18, 33) and skip information* (p. 30).
In addition, a total of 10 memory banks, A to J, are available
for usage by group, etc.
20
*except for scan edge memory channels.
■ Selecting a memory channel
q Push [C•
] to select memory mode.
MR
• " X " appears.
C
Push
MR
wEnter 2 digits to select the desired memory channel (or
push the [Y Y ]/[Z Z ] keys).
• The memory channels 0–9 are proceeded by a "0."
• When [VOL] is assigned as tuning dial, rotate [VOL] to select
the memory channel. (pgs. 14, 63)
1 2
Push
TONE P.BEEP
■ Selecting the call channel
➥ Push [B•
] to select the call channel.
CALL
• "C" is displayed instead of the memory channel number.
• Push [D• ] or [C• ] to select VFO or memory mode, respec-
CLR MR
tively.
B
Push
CALL
"C" appears