Icom IC-V82 Instruction Manual page 77

D D Mic simple mode
This item turns the microphone simple mode ON and OFF.
Microphone simple mode is used to change the function as-
signments for keys in the optional HM-75A
- as below. This assignment is conve-
SPEAKER MICROPHONE
nient for 3-channel use of simple operation.
• mIC.n1 : Normal 1 (default)
• mIC.n2 : Normal 2
• mIC.Sm: Simple mode
HM-75A
Mode NORMAL1
key
Freq. [B• ]
CALL
[A]
CH Null
Freq. VFO/Memory
[B]
CH Null
Freq. Freq. Up
[Y Y ]
CH Memory CH Up
Freq. Freq. Down
[Z Z ]
CH Memory CH Down Memory CH Down
A 1750 Hz tone can be transmitted with the HM-75A opera-
tion.
➥ Push [A] while pushing [PTT].
Optional HM-75A required
REMOTE CONTROL
NORMAL2 SIMPLE
[MONI] [MONI]
VFO/Memory
[B• ]
CALL
Null
Freq. Up
MR-00CH
Memory CH Up
Freq. Down
MR-01CH
OTHER FUNCTIONS
NOTE:
Turn power OFF when connecting the HM-75A to the
transceiver.
VFO mode cannot be selected via the microphone when
SIMPLE mode is selected.
D D S-meter squelch
Sets S-meter squelch threshold level from OFF (default) and
S1–S3.
This setting allows you to set a minimum signal level needs to
open the squelch.
D D ALC function
Sets the ALC (automatic Level Control) function ON and OFF
(default).
The ALC function reduces the microphone gain automatically
when the transmission audio is distorted.
12
12
65