Break-In Communication - Icom IC-V82 Instruction Manual

D D To store a received call
q Push [A•
] and [0•
FUNC OPT
sign select mode.
• "yUC" appears for station call sign.
• "R1C" or "R2C" appears for repeater call sign.
w Push [0•
] for 1 sec. to call sign indication, rotate [VOL]
OPT
to select the blank channel or erasable channel.
e Push [0•
] then, push [Y Y ] or [Z Z ] several times to select
OPT
the received call indication.
• "RXC.AL" appears for received station call sign.
• "R1C.AL" or "R2C.AL" appears for received repeater call sign.
r To confirm the received call, push [0•
enter the received call sign indication mode.
tPush [0•
] for 1 sec. to store the call sign into the se-
OPT
lected station call sign channel or repeater call sign chan-
nel.
] several times to select the call
] for 1 sec. to
OPT
DIGITAL MODE OPERATION

■ Break-in communication

The break-in function allows you to break into an another sta-
tions communications in both Digital voice and low-speed
data operation.
q While receiving another station communication, push
[A• ] then [0• ] to enter
FUNC OPT
w Push [Y Y ] or [Z Z ] several times to select the break-in set-
ting, then turns the break-in setting ON.
• "bRk" appears.
eWhen both stations are in standby, transmit to send a
break-in call.
• Programmed call sign station receives the break-in call as well
as your call sign.
rWait for the reply call from the station who receive the
break-in call.
t After receive the reply call, communicate normal way.
yTo cancel the break-in, push [A•
tate [VOL] to turn OFF.
11
.
OPTION SET MODE
] and [0• ], then ro-
FUNC OPT
11
45