Weather Channel Operation (Ic-V82 [Usa] Versions Only) - Icom IC-V82 Instruction Manual

12
OTHER FUNCTIONS
D D Battery protection function
Sets the Battery protection function for LI (Li-Ion) and OFF
(default).
LI(Li-Ion):
➥ The transceiver is required pushing [PWR] for tuning
power ON with every battery detach and attach.
➥ Beep sounds when the attached battery is exhaustion.
• The battery must be charged presently.
OFF : The transceiver memorizes the transceiver ON/OFF
condition at battery is detached.
NOTE: This item MUST be set "LI" (Li-Ion) when the at-
taching battery is BP-211N (Li-Ion).
66
■ Weather channel operation
(IC-V82 [USA] version only)
D D Weather channel selection
q Push [C•
] several times to select weather channel group.
MR
Weather channel group indication
w Push [Y Y ] or [Z Z ] several times to select the desired
weather channel.
e Push [C•
] to select memory mode, or push [D•
MR
select VFO mode.
D D Weather alert function
NOAA broadcast stations transmit weather alert tones before
important weather announcements. When the weather alert
function is turned ON, the selected weather channel is moni-
tored each 5 sec. for the announcement. When the alert sig-
nal is detected, the "ALt" and the WX channel are displayed
alternately and sounds a beep tone until the transceiver is op-
erated. The previously selected (used) weather channel is
checked periodically during standby or while scanning.
] to
CLR