COMMANDS MENU
7.1.1 Virtual inputs
COMMANDS VIRTUAL INPUTS
COMMANDS
VIRTUAL INPUTS
The states of up to 64 virtual inputs are changed here. The first line of the display indicates the ID of the virtual input. The
second line indicates the current or selected status of the virtual input. This status is a state off (logic 0) or on (logic 1).
7.1.2 Clear records
COMMANDS CLEAR RECORDS
COMMANDS
CLEAR RECORDS
7
7-2
Virt Ip 1
Off
Virt Ip 2
Off
Virt Ip 64
Off
CLEAR FAULT REPORTS?
No
CLEAR EVENT RECORDS?
No
CLEAR OSCILLOGRAPHY?
No
CLEAR DATA LOGGER?
No
CLEAR BREAKER 1
ARCING AMPS? No
CLEAR BREAKER 2
ARCING AMPS? No
CLEAR DEMAND
RECORDS? No
CLEAR ENERGY?
No
CLEAR UNAUTHORIZED
ACCESS? No
CLEAR DIRECT I/O
COUNTERS? No
CLEAR PMU 1 RECORDS?
No
CLEAR PMU 1 CONFIG
CHANGE COUNTER? No
CLEAR TELEPROTECT
COUNTERS? No
CLEAR IEC61850
XWSI OPCNT
CLEAR IEC61850
XCBR OPCNT
CLEAR ALL RELAY
RECORDS? No
CHAPTER 7: COMMANDS AND TARGETS
Range: Off, On
Range: Off, On
Range: Off, On
Range: No, Yes
Range: No, Yes
Range: No, Yes
Range: No, Yes
Range: No, Yes
Range: No, Yes
Range: No, Yes
Range: No, Yes
Range: No, Yes
Range: No, Yes.
Valid only for units with Direct Input/Output module.
Range: No, Yes
Range: No, Yes
Range: No, Yes
See below
See below
Range: No, Yes
D60 LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL