Modbus User Map - GE D60 Instruction Manual

PRODUCT SETUP
 COMMAND 0

 COMMAND 31

Commands are received as General Command (Type Identification 20). The user can configure the action to perform when
5
an ASDU command comes.
A list of available mappings is provided on the D60. This includes 64 virtual inputs (see the following table). The ON and OFF
for the same ASDU command can be mapped to different virtual inputs.
Each command is identified by the unique combination made by the function type (FUN) and information number (INF). If
the master sends an ASDU command that does not have the FUN and INF of any configured command, the relay rejects it.
Table 5-12: Commands mapping table
Description
Off
Virtual Input 1
Virtual Input 2
...
Virtual Input 64

5.3.5 Modbus user map

SETTINGS  PRODUCT SETUP  MODBUS USER MAP
 MODBUS USER MAP

The Modbus user map provides read-only access for up to 256 registers. To obtain a memory map value, enter the address
in the line (converted from hex to decimal format). The corresponding value (if programmed) displays in the
ADDRESS
line. A value of "0" in subsequent register
incremented by 1. An address value of "0" in the initial register means "none" and values of "0" display for all registers.
Different
ADDRESS
5-92
 COMMAND 31


COMMAND 0 FUN:

0
COMMAND 0 INF:

0
COMMAND 0 ON:

Off
COMMAND 0 OFF:

Off
COMMAND 31 FUN:

0
COMMAND 31 INF:

0
COMMAND 31 ON:

Off
COMMAND 31 OFF:

Off
Value
0
1
2
...
64
ADDRESS 1:

VALUE:
ADDRESS 256:

VALUE:
ADDRESS
values can be entered as required in any of the register positions.
Range: 0 to 255 in steps of 1
Range: 0 to 255 in steps of 1
Range: Virtual input
Range: Virtual input

Range: 0 to 255 in steps of 1
Range: 0 to 255 in steps of 1
Range: Virtual input
Range: Virtual input
0 Range: 0 to 65535 in steps of 1
0

0 Range: 0 to 65535 in steps of 1
0
lines automatically returns values for the previous
D60 LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL
CHAPTER 5: SETTINGS
VALUE
lines
ADDRESS