Autoreclose; Digital Counters; Selector Switches; Flex States - GE D60 Instruction Manual

CHAPTER 6: ACTUAL VALUES
— State number. The most recently received value in GOOSE message field stNum. The publisher increments stNum
stNum
each time that the state of one or more of the GOOSE message members is sent with a revised value.
— Sequence number. The most recently received value in GOOSE message field sqNum. The publisher sets sqNum
sqNum
to zero each time the state of one or more of the GOOSE message members is sent with a new value, and it increments it
whenever a GOOSE message is resent without any member value change.

6.3.10 Autoreclose

ACTUAL VALUES  STATUS  AUTORECLOSE
 AUTORECLOSE

The automatic reclosure shot count is shown here, where the shot count is the number of reclosures that can be
attempted before reclosure goes to lockout.
If the status reads "not available," try enabling and configuring the function under
AUTORECLOSE  AUTORECLOSE

6.3.11 Digital counters

ACTUAL VALUES  STATUS  DIGITAL COUNTERS  DIGITAL COUNTERS Counter 1(8)
 DIGITAL COUNTERS
 Counter 1
The present status of the eight digital counters displays here. The status of each counter, with the user-defined counter
name, includes the accumulated and frozen counts (the count units label also appears). Also included, is the date and time
stamp for the frozen count. The

6.3.12 Selector switches

ACTUAL VALUES  STATUS  SELECTOR SWITCHES
 SELECTOR SWITCHES

The display shows both the current position and the full range. The current position only (an integer from 0 through 7) is the
actual value.

6.3.13 Flex States

ACTUAL VALUES  STATUS  FLEX STATES
 FLEX STATES

D60 LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL
AUTORECLOSE

SHOT COUNT: 0
. If that does not work, the feature is not supported on your device.
Counter 1 ACCUM:

0
Counter 1 FROZEN:

0
Counter 1 FROZEN:

1970/01/01 00:00:00
Counter 1 MICROS:

0
value refers to the microsecond portion of the time stamp.
COUNTER 1 MICROS
SELECTOR SWITCH 1

POSITION: 0/7
SELECTOR SWITCH 2

POSITION: 0/7
PARAM 1: Off

Off

Range: 0, 1, 2, 3, 4
SETTINGS  CONTROL ELEMENTS 
Range: YYYY/MM/DD HH:MM:SS
Range: 0 to 4294967295 in steps of 1
Range: Current Position / 7
Range: Current Position / 7
Range: On, Off
STATUS
6
6-7