Table of Contents
Advertisement
Nexus 500
Removal
- To remove the rear shock absorber, remove the
two retaining screws shown in the figure.
Refitting
- To refit perform the operation in reverse order carefully respecting the locking torques.
Locking torques (N*m)
Rear shock absorber retainer to the chassis 38 - 46
Centre-stand
- Remove the two return springs from the centre
stand.
- Loosen the fastening nuts.
- Remove the centre stand.
- On refitting tighten the nut to the specified torque.
Locking torques (N*m)
Central stand retainers
Centre stand
We wish to inform you that from Chassis No. ZAPM3510000007012, a new centre stand has been
introduced to improve the function. The new stand differs from the old stand in having a 5 mm longer
stand arms, increasing the height of the scooter from the ground. The modification also requires the
introduction of a new stand stop buffer.
25 ÷ 30
Suspensions
SUSP - 299
Advertisement
Table of Contents
