Front Wheel Housing; Taillight Assy. - Gilera Nexus 500 Workshop Manual

Chassis

Front wheel housing

- Remove the spoiler.
- Remove the front fork.
- Remove the plate supporting bracket for the horn
and voltage regulator by loosening the two retain-
ing screws shown in the figure in order to release
the two lower retainer of the wheel housing.
- Remove the upper fixing screw of the wheel
housing to permit movement.
- In order to remove the wheel housing it is necessary to remove the front brake hose to the tank and
combination with the splitter.

Taillight assy.

- Remove the sides.
- Remove the top central screw.
- Move the headlight away and remove the lamp
holder, turning it by 30° in counter clockwise di-
rection.
CHAS - 338
Nexus 500