Pilot Lights Kit - Gilera Nexus 500 Workshop Manual

Chassis
- Remove the plugs and remove the seals on the
2 lateral windshield support arms.
- Remove the plastic cover from the windshield
support, loosening the 5 screws shown in the fig-
ure.
- Disengage the 7 retaining tabs (3 with the shield
back plate, 4 with the shield).
Once the 4 lateral tabs have been released it is
sufficient to separate the upper part from the lower
part and to pull it carefully upwards.

Pilot lights kit

- Remove the handlebar cover.
- Remove the three screws shown in the figure,
then pull the complete group from the front han-
dlebar cover.
CHAS - 348
Nexus 500