Gilera Nexus 500 Workshop Manual page 159

Nexus 500
Crankcase - crankshaft
- Remove the outside and inside transmission cov-
er and the complete driving pulley as described in
"Automatic transmission".
- Remove the flywheel cover with the cooling sys-
tem sleeves, as described in the "Flywheel cover"
chapter.
- Remove the flywheel with the starting system fol-
lowing the instruction given in "Flywheel and Start-
ing system".
- Remove the thermal group (cylinder, head, pis-
ton) as described in the «Thermal group and timing
system chapter».
Engine
ENG - 159