Shock Absorbers - Gilera Nexus 500 Workshop Manual

Suspensions
Removal
- Support the engine adequately.
- Remove the pin anchoring the engine to the
chassis.
- Move the engine backwards to take out spacers
- Remove the left spacer highlighted in the figure.
- Remove the central and the right spacer.
- To refit, follow the removal operations but in re-
verse order, being careful to observe the original
torque and to lubricate the sliding area «A» of the
right spacer on the engine bearing.
Locking torques (N*m)
Engine - chassis fixing pin
Two types of engine fixing pins, without distinction, have been fitted on the scooter:
- 17-mm flanged-head pin.
- 22-mm head pin and washer.

Shock absorbers

SUSP - 298
100 - 120
Nexus 500