Refitting The Intermediate Gear - Gilera Nexus 500 Workshop Manual

Nexus 500
- Degrease the threading of the holes in the free wheel and the clamping screws.
- Apply the recommended product to the end of the screws.
Recommended products
Loctite 243 Medium strength threadlock
Loctite 243 medium-strength threadlock
- Fit the freewheel on the magneto flywheel making
sure that the ground side is in contact with the fly-
wheel itself, i.e. with wheel seeger ring visible.
- Lock the six clamping screws in criss-cross fash-
ion to the prescribed torque.
Locking torques (N*m)
Screw fixing freewheel to flywheel
- Oil the free wheel "rollers".

Refitting the intermediate gear

- Lubricate the gear housing on the engine crank-
case.
13 ÷ 15
Engine
ENG - 123