End Gear; Removing The Hub Cover; Removing The Wheel Axle; Transmission Cover - Gilera Nexus 500 Workshop Manual

Nexus 500
- Install the outside plastic transmission cover.
- Tighten the 4 fastening screws to the prescribed
torque.
Locking torques (N*m)
External transmission cover screws

End gear

Removing the hub cover

- Drain the rear hub oil through the oil drainage cap
located under the engine.
- Drain the rear hub oil through the oil drainage cap
located under the engine.
-Remove the 7 fastening screws. Remove the hub
cover and the relevant gasket.

Removing the wheel axle

- Remove the countershaft.
- Remove the wheel axis complete with gear.
7 ÷ 9
Engine
ENG - 95