Coolant Temperature Sensor: - Gilera Nexus 500 Workshop Manual

Nexus 500
- Tighten the 3 side screws to the prescribed tor-
que.
Locking torques (N*m)
Head fixing screws
10 - 12
- Install the coolant temperature sensor with the
washer and tighten to the prescribed torque.
CAUTION
FAILURE TO OBSERVE THE TIGHTENING TORQUE CAN
DAMAGE THE SENSOR.
Locking torques (N*m)

coolant temperature sensor:

- Install the spark plug and tighten to the prescribed torque.
Locking torques (N*m)
Spark plug 12 ÷ 14
- Insert the timing control belt on the crankshaft
according to the initial direction of rotation.
- Install the tensioner shoe with its spacer, tight-
ening the bolt to the prescribed torque, using the
recommended product.
Recommended products
Loctite 243 Medium strength threadlock
Loctite 243 medium-strength threadlock
Locking torques (N*m)
Tensioner sliding block fixing screw
- Insert pins and rocking levers on the flywheel
side.
- Lubricate the two rocking levers through the
holes at the top.
10 - 12
10 - 14
Engine
ENG - 149