Advertisement
English
•
To disable the Bluetooth visibility, press the
preprogrammed button.
You hear a short, medium-pitched tone. The display
shows momentary Visibility Off. Visibility mode
is disabled.
When the timer expires, the status changes to
Visibility off failed. Repeat this step to turn
off Bluetooth visibility.
PIN Authentication in Pairing
For the security of your radio, Bluetooth Pairing PIN feature
is designed to enable your radio to verify the correct device
to pair before initiating the pairing. Authentic PIN is used for
the verification.
NOTE:
The pairing PIN authentication method is only
applicable for Bluetooth version 2.1 and above.
168
Pairing the Authentication PIN when
Receiving a Pairing Request
1 When the radio display shows <Device Friendly
Name> pair request, perform one of the following
actions:
•
To accept, press the Menu Select button below
Ok.
•
To reject, press the Menu Select button below
Cncl.
Your radio only supports HSP, DUN, PAN and SPP
Bluetooth profiles.
When the pairing timer expires, the display shows
<Device Friendly Name> pair canceled and
return to Home screen.
If you choose to accept the pairing process, the
display shows Compare PIN: XXXXXX.
If you choose to reject the pairing process, the
display shows Cancel pairing in progress...
followed by <Device Friendly Name> pair
canceled and return to Home screen.
Send Feedback
Advertisement
