Advertisement
English
Available Dev screen shows a list of Bluetooth
devices found. To stop the search before the search
timer expires, press the preprogrammed Bluetooth
Search button or the Menu Select button below
Stop.
If the feature fails to initiate, the radio sounds a
short, low-pitched tone. The screen shows BT
Search failed. Press the Menu Select button
below Back to return to Bluetooth feature screen, or
or the Menu Select button below Exit to
press
return to Home screen.
2
or
to the device name and press the Menu
Select button directly below Sel to connect to the
device.
The radio starts pairing to the device.
To continue with Bluetooth pairing, see
Frequency-Motorola Proximity Pairing (LF-MPP) Feature
on page
163.
166
Turning On Bluetooth Visibility
Turning Bluetooth visibility on enables other Bluetooth
devices to search for your radio. The visibility of the
Bluetooth is set to turn off by default.
The following methods are options on how to turn on
Bluetooth visibility. The result of all the methods is the
same. You can use the options interchangeably depending
on your preference and the programmed functions.
Pairing with Low
Turn on Bluetooth visibility via radio menu BT:
•
to BT. Press the Menu Select button
a.
or
directly below BT to access the Bluetooth feature
screen.
to Visibility and press the Menu
b.
or
Select button directly below On.
The status changes to Visible to all. Visibility
mode is enabled.
When the timer expires, the status changes to
Visibility failed. Repeat the procedure to
turn on Bluetooth visibility.
•
Turn on Bluetooth visibility via the preprogrammed
button.
Send Feedback
Advertisement
