Removing And Attaching The Accessory Connector Cover - Motorola 3 User Manual

3 To remove the antenna, turn the antenna
counterclockwise.
NOTE:
When removing the antenna, ensure that the
radio is turned off.
Send Feedback
Removing and Attaching the
Accessory Connector Cover
The accessory connector is on the antenna side of the
radio. It is used to connect accessories to the radio.
NOTE:
To prevent damage to the connector, shield it with
the connector cover when not in use.
1 To remove the accessory connector cover, rotate the
thumbscrew counterclockwise until it
disengages from the radio.
NOTE:
If the thumbscrew is too tight, use an Allen
wrench at
English
to loosen it first.
35