Advertisement
all BT devices failed. The display returns to
Bluetooth feature screen.
NOTE:
If Re-Pair Timer is set to infinite and you clear keys
on the radio, you must clear keys on all previously
paired devices as well. (Please see your
accessories manual for further details.)
Editing the Bluetooth Friendly Name
Your radio must be preprogrammed to allow you to use this
feature.
1
to BT. Press the Menu Select button directly
or
below BT to access the Bluetooth feature screen.
to Friendly name and press the Menu
2
or
Select button directly below Edit.
A blinking cursor appears in the Friendly Name
screen.
3 Use the keypad to edit the text.
4 Perform one of the following actions:
Send Feedback
Press the Menu Select button directly below Ok
•
to save the new Friendly Name and return to the
Bluetooth feature screen.
•
Press the Menu Select button directly below
Cncl to return to the Bluetooth feature screen.
Over-the-Air Programming (POP 25,
ASTRO 25, ASTRO Conventional)
This feature enables configuration data and firmware to be
upgraded to your radio over-the-air. Full use of the radio is
retained during the data transfer without interrupting
communication. For ASTRO 25 and ASTRO Conventional,
the upgrade pauses to give priorities to voice call, and
continues after the voice call ended. For Wi-Fi
upgrade process runs concurrently with voice calls.
Once a configuration upgrade is downloaded to your radio,
you can install new changes immediately or delay changes
to be installed on the radio when it is being powered up.
Your radio can also be configured to allow you to accept or
reject an upgrade.
English
®
, the
175
Advertisement
