Advertisement
English
your dealer or system administrator for more
information on the programming of this feature.
NOTE:
For BT PTT press, the active microphone can
be configured in CPS to transmit from either
the Remote Speaker Microphone (RSM), the
radio microphone, or the BT headset. If the
configured device is not available, audio
transmission reverts to BT headset.
Turning Off the Bluetooth Audio
The following methods are options on how to turn off the
Bluetooth Audio. The result of all the methods is the same.
You can use the options interchangeably depending on
your preference and the programmed functions.
Turning off the Bluetooth audio via radio menu BT:
•
to BT. Press the Menu Select button
a.
or
directly below BT to access the Bluetooth feature
screen.
to Bluetooth spkr and press the
b.
or
Menu Select button directly below Off.
The display shows Off.
172
c. To return to the Home screen, press the Menu
Select button directly below Exit.
•
Turning off the Bluetooth audio via the
preprogrammed button:
a. To route the audio routing from the headset to the
radio, press the preprogrammed button.
You hear a short, medium-pitched tone. The
display shows Speaker on.
Adjusting the Volume of the Radio from
Bluetooth Audio Device
Ensure that the Bluetooth audio device is connected to the
radio.
Your radio can only control the volume of MCW and OCW
Bluetooth enabled audio device. If the radio is paired with
other Bluetooth enabled audio device, its volume is
Send Feedback
Advertisement
