Advertisement
Re-Pair Timer
Description
Options
dio. The radio and accessory re-
mains paired indefinitely. Once the
device re-connect, the timer is reset.
The radio could not control the Drop Timer of Personal
Area Networking (PAN), Dial-Up Networking (DUN),
Commercial Off- The-Shelf (COTS) and data services. It
depends on the specifications of these external devices.
Check with your dealer or system administrator for more
information about these timers.
To establish the Bluetooth Connection, see
Low Frequency-Motorola Proximity Pairing (LF-MPP)
Feature on page 163
or
Standard Pairing Feature on page
165
.
Pairing with Low Frequency-Motorola
Proximity Pairing (LF-MPP) Feature
Ensure that Bluetooth feature of your radio is on and the
Bluetooth tones are enabled.
Bluetooth tones, Bluetooth menu and preprogrammed
buttons must be preprogrammed by a qualified radio
Send Feedback
technician. Check with your dealer or system administrator
for more information.
The range of Bluetooth operation when using a MCW
accessory is 10 meters line-of-sight communication. This is
an unobstructed path between the location of the signal
transmitter (your radio) and the location of the receiver
(your device or accessory).
Obstacles that can cause an obstruction in the line-of-sight
include trees, buildings, mountains, cars and etc.
For high degree of reliability, Motorola recommends to NOT
separate the radio and the accessory.
At the fringe areas of reception, both voice and tone quality
will start to sound "garbled" or "broken". To correct this
Pairing with
problem, simply position the accessory and radio closer to
each other (within the 10 meter defined range) to re-
establish clear audio reception.
NOTE:
Once a COTS headset is paired to your radio, it is
always connected. Therefore the battery life of the
accessory is aligned with the Talk Time power
consumption, not the Standby Time consumption.
Turn on the accessory. Then, place it close to the
radio aligning the Bluetooth Pairing Location (a blue
English
163
Advertisement
