English
Entering the Dynamic Zone to Select a
Dynamic Channel
1
to Zone then press the Menu Select button
or
directly below Zone.
The display shows the Zone screen.
to <# Dynamic Zone Channels>
or
2
3 Perform one of the following actions:
Press the Menu Select button below Sel to
•
select.
Press the Menu Select button below Exit to exit.
•
If you have selected one of the Dynamic Zone
Channels list, the display returns to Home screen
with the selected <# Dynamic Zone Channels>
shown on the screen.
If you have selected Exit without selecting any
Dynamic Zone Channels list, the display returns to
Home screen without any changes.
2
# indicates number of the channel on the 16-Position Switch which are numbered from 1 to 16.
86
2
2
2
Saving a Channel in the Dynamic Zone
from List Selection
The radio must be in Dynamic Zone in order to perform this
operation.
1
to ZnPr. Press the Menu Select button
or
directly below ZnPr to enter Program Zone screen.
2 Press the Menu Select button directly below Edit.
The display shows Search Options screen.
to List Selection. Press the Menu
3
or
Select button directly below Sel.
The display shows Select Zone screen.
Send Feedback