Advertisement
English
NOTE:
Emergency must be set up for this feature to
operate. For details on operating the Emergency
alerts, please see
Emergency Operation on page
101.
If the radio is preprogrammed to horizontal only, it
must be worn in a vertical position otherwise the
Man Down alert may be inadvertently triggered.
When the radio is programmed with Man Down
feature, special care is required when charging the
radio with a wall mounted charger. See
Ways to Handle the Radio on page 202
Pre-Alert Timer
This timer sets the amount of time that a Man Down
condition must be present before the radio-user is warned
of the Man Down condition.
When the radio detects that it has returned to the vertical
position or when the radio detects motion, the Pre-Alert
timer stops and is reset.
The Pre-Alert timer reinitiates when the radio detects it is in
the horizontal position or motionless again.
110
Post-Alert Timer
This timer sets the amount of time the radio needs to
remain in the Man Down condition before the Emergency
alarm is transmitted.
See
Exiting Man Down Feature on page 112
Down feature.
Radio Alerts When Man Down Feature
is Triggered
Proper
for details.
The Man Down alert tone volume is directly related to the
radio speaker volume. Ensure that the radio speaker
volume is loud enough so that the user does not miss the
Post-Alert tone.
NOTE:
If the radio is programmed with Silent Emergency,
the radio inhibits the alert tone and visual alert
associated with the emergency feature.
If the radio is programmed in Surveillance Mode, the
radio inhibits all tones and lights on the radio
including the Man Down tones.
to exit Man
Send Feedback
Advertisement
