Advertisement
•
Press the Menu Select button directly below
Send to initiate command.
If the receiving radio received the command, your
radio display shows Ack received.
If the receiving radio does not have encryption key to
decrypt the received encrypted command, your radio
display shows Decrypt failed.
If the receiving radio is powered off or already killed,
your radio display shows No Acknowledgement.
Once the receiving radio received the command, its screen
turns blank, the killed radio is inoperable.
Using Direct Kill to Kill Your Own Radio
Direct Kill allows you to make your own radio inoperable.
Press and hold the Top Side button then press the
Orange button until the display turns blank and
becomes inoperable.
Send Feedback
Global Positioning System / Global
Navigation Satellite System
The Global Navigation Satellite System (GNSS) in the radio
uses information from the Global Positioning System (GPS)
to determine the approximate geographical location of your
radio. The geographical location is expressed as latitude
and longitude or Military Grid Reference System (MGRS)
format per request from customers.
NOTE:
This feature is addressed as GPS across the
manual as the naming convention of the buttons
and strings remain the same as the legacy feature
of GPS.
The availability and accuracy of this location information
(and the amount of time that it takes to calculate it) varies
depending on the environment in which you are using the
GPS feature.
For example, GPS location fixes are difficult to obtain
indoors, in covered locations, between high buildings, or in
situations where you have not established a clear broad
view of the sky.
English
145
Advertisement
