Advertisement
Your radio also supports a maximum of 50 call lists. Each
list can store up to 100 IDs (numbers).
NOTE:
Your radio is preprogrammed with a number of
contacts per Call Lists. Check with your dealer or
system administrator for more information.
The radio automatically exits the feature, if the
feature inactivity timer is enabled, when the radio is
left idle and the timer expires. You hear the Menu
Inactive Exit Tone upon feature exit.
Making a Private Call from Contacts
Your radio must be preprogrammed to allow you to use this
feature.
1
to Cnts and press the Menu Select button
or
directly below Cnts.
The entries are alphabetically sorted.
2
or
to the required subscriber alias.
3 Perform one of the following actions:
•
Press the Menu Select button directly below
Optn and proceed to the next step.
Send Feedback
•
or
to scroll through the available IDs for the
selected subscriber alias and proceed to step
step
6.
to Call and press the Menu Select
4
or
button directly below Sel.
5
or
to select the call type.
6 Hold the radio vertically 1 to 2 in. (2.5 to 5.0 cm)
from your mouth.
7 Press the PTT button to initiate the call.
During the call, the display shows the subscriber
alias.
8 Press and hold the PTT button to talk. Release the
PTT button to listen.
The LED lights up solid red when the PTT button is
pressed.
If there is no voice activity for a preprogrammed period of
time, the call ends.
If the call reaches the maximum ring time, the call ends.
English
89
Advertisement
