The command terminal receives the following status
updates from your radio:
•
Powering up or down the radio
•
Automatic response to Polling
•
Response to Evacuation commands
•
Pressing the PTT button to make voice transmission
•
Sending an Emergency Alarm and Call
•
Entering or Exiting a Trunking Talkgroup
Entering Fireground Zone Channel
(Conventional)
1 For Conventional radio systems: Upon powering up,
perform one of the following actions:
•
If the Fireground Zone Channel is set as default,
you hear the gurgle tone and the radio displays
the home screen. You are in Fireground zone
channel.
•
Get a qualified technician for assistance.
Send Feedback
•
If your home channel is not Fireground Zone
Channel, toggle or change the radio zone
channel to Fireground Zone Channel.
2 Entering Fireground Trunking Talkgroup: Upon
powering up, ensure that the Fireground Trunking
Talkgroup is selected. The subscriber unit
automatically appears on the Incident Commander's
terminal.
3 Listen for a transmission. Adjust the Volume
Control Knob if necessary.
4 Perform one of the following actions:
•
Press and hold the preprogrammed Volume Set
button to hear the volume set tone. Adjust the
Volume Control Knob if necessary. Release the
Volume Set button.
•
At the desired Fireground zone and channel,
press the preprogrammed Monitor button and
listen for activity. Adjust the Volume Control
Knob if necessary.
•
If your radio is working in Fireground Zone
Channel, proceed to next step.
English
107