Radio Kill; Using Remote Kill To Kill Another Radio - Motorola 3 User Manual

English
If the receiving radio is powered off, your radio
display shows No Acknowledgement.
Once the receiving radio received the command, its screen
locked and request for password.
NOTE:
To un-stun a radio, follow the procedure in
Unlocking Your Radio on page

Radio Kill

This feature allows you to render your radio or another
radio inoperable if the radio is misplaced or lost. When a
radio is killed, the display turns blank and all functions of
the radio are not usable.
The killed radio can only be recovered from KILL with a
special device. Consult an authorized and qualified
technician for details.
144

Using Remote Kill to Kill Another Radio

Remote Kill allows you to render another radio inoperable
by sending an over the air command using the menu on
your radio.
140.
1 to Kill.
or
2 Press the Menu Select button directly below Kill.
The display shows Enter Password.
3 Use the keypad to enter your Tactical Inhibit Encode
Password.
4 Press the Menu Select button directly below Ok.
The display shows radio Contact IDs.
5 Perform one of the following actions:
• or to the required ID.
• Press the Menu Select button directly below
LNum to go to the last number dialed.
• Use the keypad to enter the required ID.
Send Feedback