Table of Contents
Advertisement
Receiving Pairing Request from other Devices
When your radio receives a pairing request from other
device, the display shows <Device Friendly
Name>pair request.
Press the Menu Select button below Ok to accept
or Cncl to refuse pairing request.
Turning Off Bluetooth Visibility
Ensure that Bluetooth Visibility is turned on.
The following methods are options on how to turn off
Bluetooth visibility. The result of all the methods is the
same. You can use the options interchangeably
depending on your preference and the programmed
functions.
Turn off Bluetooth visibility via radio menu BT:
•
a)
or to BT. Press the Menu Select button
directly below BT to access the Bluetooth
feature screen.
b)
or
Select button directly below Off.
The display shows Visibility Off.
126
English
to Visibility and press the Menu
When the timer expires, the status changes to
Visibility off failed. Repeat this step to
turn off Bluetooth visibility.
c) To return to the Home screen, press the Menu
Select button directly below Exit.
•
To disable the Bluetooth visibility, press the
preprogrammed button.
You hear a short, medium-pitched tone. The
display shows momentary Visibility Off.
Visibility mode is disabled.
When the timer expires, the status changes to
Visibility off failed. Repeat this step to
turn off Bluetooth visibility.
PIN Authentication in Pairing
For the security of your radio, Bluetooth Pairing PIN
feature is designed to enable your radio to verify the
correct device to pair before initiating the pairing.
Authentic PIN is used for the verification.
Note:
The pairing PIN authentication method is only
applicable for Bluetooth version 2.1 and
above.
Advertisement
Table of Contents
