Advertisement
English
dot) on the radio to the Bluetooth Pairing Location (a
blue dot) on the accessory.
If the pairing process is successful, you hear an
incremental-pitched tone. The radio begins to
connect to the device.
If the pairing process fails, you hear a short, low-
pitched tone. The display shows Bluetooth
pairing failed. Repeat this step.
The radio tries to establish connection with the device once
paired.
NOTE:
If the connection fails within 6 seconds, you hear a
decremental-pitched tone to indicate that the device
is unpaired. The display shows <Device Type>
unpaired. Repeat this step to re-initiate the pairing
process.
If the connection is successful, you hear an incremental-
pitched tone. The display shows <Device Type>
connected and the Bluetooth icon turns from
If the radio has the pairing record of the device and the
connection fails, you hear a short, low-pitched tone. The
display shows <Device Type> connect failed.
164
Radio Indications of Lost Bluetooth
Connection
The radio shows
connection. Below are the radio indications when the
connection is interrupted.
The
starts blinking for up to 10 seconds. You hear a
decremental-pitched tone. The display shows <Device
Type> alternating with disconnected.
If the Bluetooth device successfully re-connects before the
Bluetooth 10 second Re-Connection Timer expires, the
display shows momentary <Device Type> connected,
and
stops blinking, or if the Bluetooth device fails to re-
connect within 10 seconds, the blinking
persistent
to
.
when the device has a Bluetooth
.
Send Feedback
is replaced by a
Advertisement
