Advertisement
2 Use the keypad to type or edit your channel name.
3 To initiate searching, press the Menu Select button
directly below CSrh once the entry is done.
To exit this procedure, press the Menu Select button
directly below Cncl.
The display shows Searching. Once found, the display
shows the matched channel name and the radio changed
its transmission to the selected channel.
If the radio is triggered to search for an empty entry, the
display shows Invalid entry. Repeat step
search again.
If the entry does not match, the display shows Channel
name not found. Repeat step
or the Menu Select button directly below Exit to
press
exit.
Mode Select Feature
Mode Select allows a long press to save the current zone
and channel of your radio to a programmable button,
keypad button, or a softkey; then once programmed, the
short-press of that button or softkey changes the
transmission to the saved zone and channel.
Send Feedback
step 2
to
step 2
to search again; or
There are two methods to save the selected zone and
channel:
•
Softkeys
•
Programmable buttons and keypad buttons (digit 0 to 9)
NOTE:
Your radio must be preprogrammed to allow you to
use this feature.
Saving a Zone and a Channel to a
Softkey
Five softkeys are available for you to save the frequently
used zone and channel.
1 Toggle your zone and channel to the required zone
and channel.
2
to MS1, MS2 ... or MS5.
or
3 Press and hold the Menu Select button directly
below one of the softkey (MS1 – MS5).
You hear a short, medium-pitched tone when the zone and
channel is saved.
English
71
Advertisement
