Table of Contents
Advertisement
When the timer expires, the status changes to
Visibility off failed. Repeat this step to
turn off Bluetooth visibility.
c) To return to the Home screen, press the Menu
Select button directly below Exit.
•
To disable the Bluetooth visibility, press the
preprogrammed button.
You hear a short, medium-pitched tone. The
display shows momentary Visibility Off.
Visibility mode is disabled.
When the timer expires, the status changes to
Visibility off failed. Repeat this step to
turn off Bluetooth visibility.
PIN Authentication in Pairing
For the security of your radio, Bluetooth Pairing PIN
feature is designed to enable your radio to verify the
correct device to pair before initiating the pairing.
Authentic PIN is used for the verification.
Note:
The pairing PIN authentication method is only
applicable for Bluetooth version 2.1 and
above.
148
English
Pairing the Authentication PIN when Receiving a
Pairing Request
1 When the radio display shows <Device Friendly
Name> pair request, perform one of the
following actions:
•
To accept, press the Menu Select button
below Ok.
•
To reject, press the Menu Select button below
Cncl.
Your radio only supports HSP, DUN, GAP, PAN
and SPP Bluetooth profiles.
When the pairing timer expires, the display shows
<Device Friendly Name> pair canceled and
return to Home screen.
If you choose to accept the pairing process, the
display shows Compare PIN: XXXXXX.
If you choose to reject the pairing process, the
display shows Cancel pairing in
progress... followed by <Device Friendly
Name> pair canceled and return to Home
screen.
Advertisement
Table of Contents
