Table of Contents
Advertisement
English
Receiving Pairing Request from other
Devices
When your radio receives a pairing request from other
device, the display shows <Device Friendly Name>pair
request.
Press the Menu Select button below Ok to accept or
Cncl to refuse pairing request.
Turning Off Bluetooth Visibility
Ensure that Bluetooth Visibility is turned on.
The following methods are options on how to turn off
Bluetooth visibility. The result of all the methods is the
same. You can use the options interchangeably depending
on your preference and the programmed functions.
•
Turn off Bluetooth visibility using the radio menu BT:
a.
or to BT. Press the Menu Select button
directly below BT to access the Bluetooth feature
screen.
138
b.
or
to Visibility and press the Menu
Select button directly below Off.
The display shows Visibility Off.
When the timer expires, the status changes to
Visibility off failed. Repeat this step to
turn off Bluetooth visibility.
c. To return to the Home screen, press the Menu
Select button directly below Exit.
•
To disable the Bluetooth visibility, press the
preprogrammed button.
You hear a short, medium-pitched tone. The display
shows momentary Visibility Off. Visibility mode
is disabled.
When the timer expires, the status changes to
Visibility off failed. Repeat this step to turn
off Bluetooth visibility.
PIN Authentication in Pairing
For the security of your radio, Bluetooth Pairing PIN feature
is designed to enable your radio to verify the correct device
Advertisement
Table of Contents
