Radio Stun And Kill; Radio Stun; Using Radio Stun - Motorola 3 User Manual

2 Press the Menu Select button directly below Logf.
One of the following results occur.:
The display shows Pswd enabled, indicating that the
•
radio lock feature is enabled.
The display shows Pswd disabled, indicating that the
•
radio lock feature is disabled.

Radio Stun and Kill

Radio Stun

This feature allows you to stun another radio by sending an
over the air command using the menu on your radio. This
feature prevents an unauthorized user from using the radio.
Once the radio is stunned, a password is required to re-
activate the stunned radio.

Using Radio Stun

1
to Stun.
or
Send Feedback
2 Press the Menu Select button directly below Stun.
The display shows Enter Password.
3 Use the keypad to enter your Tactical Inhibit Encode
Password.
4 Press the Menu Select button directly below Ok.
The display shows radio Contact IDs.
5 Perform one of the following actions:
• or to the required ID.
• Press the Menu Select button directly below
LNum to go to the last number dialed.
• Use the keypad to enter the required ID.
• Press the Menu Select button directly below
Send to initiate command.
If the receiving radio does not have encryption key to
decrypt the received command, your radio display
shows Ack received.
If the receiving radio does not have encryption key to
decrypt the received encrypted command, your radio
display shows Decrypt failed.
English
143