Figure 3-21 Location Of The Power And Ground Terminals On Size 2C And 2D Drives; Table 3-1 Drive Control, Status Relay And Encoder Terminal Data; Table 3-3 Drive Power Stage Terminals On Size 1 Drives; Table 3-4 Drive Power Stage Terminals On Size 2 Drives - Emerson MP25A4 User Manual

Safety Product Mechanical
Information information Installation

Figure 3-21 Location of the power and ground terminals on size 2C and 2D drives

3.9.2 Terminal sizes and torque settings
To avoid a fire hazard and maintain validity of the UL listing,
adhere to the specified tightening torques for the power and
ground terminals. Refer to the following tables.
WARNING
3.9.3 Torque settings

Table 3-1 Drive control, status relay and encoder terminal data

Model Connection type
All Plug-in terminal block
Table 3-2 Drive auxiliary and machine armature terminal data
Model Connection type
All Terminal block

Table 3-3 Drive power stage terminals on size 1 drives

Model Connection type
All M8 stud
30
Electrical Getting Basic
installation started parameters
Machine
feedback
terminals
Torque setting
0.5 Nm 0.4 lb ft
Torque setting
0.5 Nm 0.4 lb ft
Torque setting
10 Nm 7.4 lb ft
www.controltechniques.com
Running the SMARTCARD
Optimization
motor operation
5mm
3.5mm
Auxiliary
Relay
5mm
connections
connections
Ground
connections

Table 3-4 Drive power stage terminals on size 2 drives

Model
Size 2A
Size 2B
Size 2C
Size 2D
Onboard Advanced Technical
PLC parameters data
3.5mm
Tacho
connections
2.5mm
Control and
encoder
connections
T25 Torx
Connection type Torque setting
M10 stud 15 Nm (11.06 lb ft)
M12 stud 30 Nm (22.12 Ib ft)
Mentor MP User Guide
UL
Diagnostics
information
Issue: 3