Safety
Product
Mechanical
Information
information
Installation
Table 9-7 SMARTCARD status indications
Lower
display
boot
A parameter set is being transferred from the SMARTCARD to the
drive during power-up. For further information please refer to section
9.3.4 Booting up from the SMARTCARD on every power up (Pr 11.42
(SE09, 0.30) = boot (4)) on page 82.
cArd
The drive is writing a parameter set to the SMARTCARD during power-
up. For further information please refer to section 9.3.3 Auto saving
parameter changes on page 82.
Mentor MP User Guide
Issue: 3
Electrical
Getting
Basic
Running the
installation
started
parameters
Description
www.controltechniques.com
SMARTCARD
Optimization
motor
operation
Onboard
Advanced
Technical
Diagnostics
PLC
parameters
data
UL
information
85