Pitney Bowes Relay 5000 Operator's Manual page 82

3 • Basic Operation
Insert Options
(continued)
3-38
Length is the •
dimension of the
insert in the direction
of the feed.
•
•
Auto measure - measures the recommended length
automatically.
NOTE: Auto measure is not available when "Large Booklet" is
the selected insert or when the job requires a Custom Feeder.
Custom Length - allows increase or decrease of insert length.
- Use the UP/DOWN Arrow Keys to select number.
- Select "Accept" when done.
NOTE: If the job requires a Large Booklet, you must enter the
sheet length using this Custom Length option. The job will not
be valid if the booklet length is not entered.
Custom Length (Large Booklet Only) - allows selection of large
booklet size: 8.5 inch x 11 inch (216mm x 279mm) or 5.5
inches x 8.5 inches (140mm x 216mm).
NOTE: If the job requires a Large Booklet, you must enter the
sheet length using this Custom Length option. The job will not
be valid if the booklet length is not entered.
SV63136 Rev. A